ECS20001200 | EPS Corner Step 2000 X 1200mm 90°

EPS Easy Build In-pool Corner Steps | Suitable for liner pools

An increased product range with new features added

Following on from the launch of our EPS easy build steps we are pleased to announce the addition of a new size to the product range. In addition to the existing 3 sizes, we are now able to offer a 3 tread step to suit 1020mm (3′4′′) depth pools.

Made from a 25kg/m³ density EPS block which is covered in shaped non-corrosive Magnelis steel sheeting, the units are lightweight and easy to handle. No concreting or rendering is needed, and with adhesives included and no specialist tools required the build time is approximately one hour.

• No concreting or rendering required

• No specialist tools needed

• Quick and easy to assemble – 1hour approximate build time

• Includes the required contact adhesive and liner protection tape

• Lightweight and easy to handle

• Delivered on a single pallet

• Suitable for factory made and site applied vinyl linings

• 4 different size options available

• Available to suit pools between 1020 and 1500mm wall depth

• All sizes of step are suitable for 90° and 6” radius corner pools

Please note: Presence of water behind the pool liner can cause the EPS step to lift or move following installation – adequate under pool drainage, designed to suit the ground conditions, should be put in place in order to keep the pool shell dry. If used in conjunction with a bag style liner, there should be a minimum of 150mm of water above the top tread.